Submersible Water Pumps

Our SCTH750 pump with a 100' power cord. Long lasting, continuous duty pump made out of stainless steel and fiber reinforced pastic. Vortex design helps prevent clogging. Built-in overload and overheat motor protection. 2”...

Our SCTH750 pump with a 50' power cord. Long lasting, continuous duty pump made out of stainless steel and fiber reinforced pastic. Vortex design helps prevent clogging. Built-in overload and overheat motor protection. 2”...

Same stainless steel submersible pump as our SCTH400 pump but with a 50' power cord. Great pump for waterfalls, streams and fountains. Continuous use. Low maintenance. Draws3.7 - 6.0 amps. 115 volts. Stainless steel...

Same waterfall pump as our SCTH400 pump but with 100' power cord. Great pump for waterfalls, streams and fountains. Continuous use. Low maintenance. Draws 3.7 - 6.0 amps. 115 volts. Stainless steel. Fiber reinforced...

Fits our SCTH100 - 750 pumps. Helps to prevent debris and fish from getting sucked into the bottom of the pond.

Same pump as our SCTH250 pump but in 230 volts.

Same pump as our SCTH250 pump but has 100' power cord. Great pump for waterfalls, streams and fountains. Continuous use. Low maintenance. Draws 1.5 - 2.1 amps. 115 volts. Stainless steel. Fiber reinforced plastic pump...

Same pump as our SCTH250 pump but has 50' power cord. Great pump for waterfalls, streams and fountains. Continuous use. Low maintenance. Draws 1.5 - 2.1 amps. 115 volts. Stainless steel. Fiber reinforced plastic pump...

Great pump for waterfalls, streams and fountains. Continuous use. Low maintenance. Draws 1.5 - 2.1 amps. 115 volts. Stainless steel. Fiber reinforced plastic pump casing. Low maintenance. Built-in overload and overheat...

Same pump as our SCTH150 submersible pump but with 50' power cord.

Same stainless steel submersible pump as our SCTH150 but with 100' power cord.

3 HP, heavy-duty, high head submersible pump. 3” outlet with 20’ power cords and thermal overload protection. 230 volts. Top quality Japanese double mechanical seals for over 100,000 hours of life expectancy. Draws 14.5 amps...

This submersible pump pushes up to 17,500 GPH flow at 230 volts. 3"outlets with 30' power cords and thermal overload protection. Oil free design - ideal for fish ponds. Top quality Japanese double mechanical seals. Draws ...

Heavy-duty, high head, 2 HP submersible pump. 230 volts. 3” outlet. 20’ power cord with thermal overload protection. Minimum of 20’ head pressure required. Use ball valve to create back pressure if system has less than 20’...

This pump pushes up to 13,500 GPH flow. 3" outlet with 30' power cord and thermal overload protection. Oil free design - ideal for fish ponds. Top quality Japanese double mechanical seals. 1.5 HP Max 12 amps. 115 volts...

Same as our SCTB8000 pump but as 230 volt.  Comes with a 20' cord with no plug.  Will need to be hard-wired.

Use this heavy-duty 1 HP submersible waterfall pump when a lot of pressure is needed at a minimum of 20’. 3” outlet. 20’ power cord with thermal overload protection. Top quality Japanese double mechanical seals provides for...

6000GPH, 1 HP submersible pump, stainless steel, corrosion-resistant, continuous duty pump. Vortex design prevents clogging. Built-in overload and overheat motor protection. 2” female threaded outlet. Maximum flow rate:...

Same 6000 GPH pump as our SCTH750 pump but 230 volts.

Great pumps for water falls and streams! The TH Series pumps have proven to be a great choice for ponds, waterfalls, fountains and similar applications. Thousands of these pumps are in use throughout North America in a wide...