Use a variety of fountain nozzles to produce a beautiful water feature. Keep in mind that the fountain nozzle is what produces a particular spray pattern but the size of the pump that it is attached to determines it's height and width.
The most popular spray pattern we offer, the three tier pattern is a great choice since the multiple tiers of water provide a full, thick looking spray. 1 1/2" inlet size.
Use with pumps with 1" outlet. Base is 1" MPT.
This nozzle produces a beautiful and elegant 3-tier spray pattern up to 9 ft. high and 6 ft wide. Use with pumps with 1" outlet. Base is 1" MPT. Dimensions (Dia x L): 2.4 x 6.3 in.
1" Bronze Aerating Nozzle Size 1". Produces a narrow white water stream, swivel allows nozzle to tilt up to 15 degrees. Less water level dependent than froth nozzle (SCFN1). Unique design allows water level to fluctuate a...
The fan jet nozzle produces a solid fan shaped spray. Ideal when used at a 45?¤ angle around the perimeter of a pool or fountain. Best used in a wind free area to maintain spray pattern. Looks best when used in multiples...
This popular nozzle produces a thick, foaming geyser of water. Creates an eye catching column of spray and is often used in multiple nozzles, each at a different height for a dramatic display. Due to air being mixed with...
Bronze Multi-Spray NozzlesCircular spray with hundreds of water droplets, an impressive display without a lot of soundNot water level dependentUse adequate screening on pump inlet to prevent debris from plugging...
Bronze Waterbell NozzlesClassic formal spray patternNot water level dependent
Diverts flow to side discharge tube to adjust height of fountains. Also used to feed water to other features such as waterfalls, using 3/4" ID vinyl tubing. Use with pumps with 1" outlet.
Rugged stainless steel construction. Adjustable fountain head. Use with pumps with 1" outlet.
Increases height of 1" fountain heads by 10-20". Use with pumps with 1" outlet.
Base is 1/2" MNPT.
Base is 1/2" MNPT.
Extension stem is used to adjust the height of 1/2" fountain heads. The stem can be cut to the desired height if needed.
Diverts flow to side discharge tube to adjust height of fountains. Also used to feed water to other features such as statuary, using 3/8" ID vinyl tubing.
These individual nozzles can be used in multiples to create spray rings, fountains or arching jets of water. Each nozzle produces a smooth, continuous stream of water.
Bronze Aerating NozzlesProduces a narrow white water stream, swivel allows nozzle to tilt up to 15?¤Less water level dependent than Frothy ?? unique design allows water level to fluctuate a few inches without affecting...
All prices are in USD. © 2014 Pond Supplies. Sitemap