Pond Supplies
Patio Supplies
Garden Supplies
Outdoor Living Supplies
Fish Supplies
Wild Bird Supplies
Fall Decor
Halloween Decor
Thanksgiving Decor
Christmas Decor

Submersible Water Pumps, High Volume

Use any of these pumps for ponds, waterfalls, re-circulating systems, de-watering, and more. 
Choose from our large selection of pumps here

The listed below are in GPM (gallons per minute).  
To calculate the gallons per hour or GPH, multiply the GPM by 60.

• 1,750 RPM motors
• 3" NPT discharge
• 115 or 230 volt motors
• 1 phase motors in stock, 3 phase available by special order

PUMP SPECIFICATIONS

• VOLUTE:  Cast iron, ASTM A-48 Class 30
• MOTOR HOUSING:  Cast iron, ASTM A-48 Class 30
• SEAL PLATE:  Cast iron, ASTM A-48 Class 30
• IMPELLER:  2 vane, open, cast iron, ASTM A-48 Class 30, balanced for smooth opoeration
• SHAFT:  Corrosion resistant stainless steel, threaded design
• O-RING:  BUNA-N assures positive sealing against oil leakage
• HARDWARE:  300 series stainless steel
• MECHANICAL SEAL:  300 Stainless steel metal parts, BUNA-N elastomers, silicon carbide vs. silicon carbide
• CABLE ENTRY:  Waterproof 33 ft. cord (plug on 115 volt) pressure grommet for sealing and strain relief
• BEARINGS:  Upper and lower single row ball bearings
• MOTOR:  Squirrel cage induction, 4 poles, oil-filled
• Single phase:  115V/230V, 50 Hz, 1/2 - 2 HP permanent split capacitor type.   Three phase:  208/230V/460V dual, 60 Hz, 1/2 - 2HP. Built in thermal protector with automatic reset
• INSULATION:  Class F

New, Lower Prices!

Carry Horizontal Pump

• 30 power cords standard - longer available
• 1/2, 3/4 and 1 HP pumps do not require a control panel
• 2 HP and larger pumps include a control panel.
• ideal for low head, high volume waterfalls!
• can use intake screen or intake horns below

These pumps are available with a high flow, low head impeller or a medium flow, medium head impeller for the same price.  Choose the pump style that best fits your needs.  Powered by water cooled, stainless steel Franklin motors.

Pumping Rates
Low Head/ High Volume Impeller

Pumping Rates
Medium Head/Medium Volume Impeller

Use one of our pump intake screen or PVC intake horns below to use with these pumps.

Carry Horizontal Pump Shown With Intake Screen

For 1.5, 2 and 3 HP pumps listed above
16" tall x 14" in diameter

Product Code:  SCCPSA
Our Price:  $402.00

BUY!

For 2, 3HP Pumps listed above
Product Code:  SCPSB
Price:   $439.00

BUY!

For 5, 7 1/2,  & 10 HP pumps listed above
Product Code:  SCCPSC
Price:  $674.00

BUY!

Carry Horizontal Pump Shown With Intake Horn

PVC Intake Horns
Intake horns are a factory installed option that are used when pumping in shallow applications to direct the suction towards the bottom of the pump and prevent pumps from sucking air.  Highly recommended on larger pumps being used in ponds or pools less than 30" deep.

Product Code:  SCCPI4
For 1/2 - 3 HP Pumps listed above
Price:  $110.00

BUY!

Product Code:  SCCPI6
For 5 - 10 HP pumps listed above
Price:  $245.00

BUY!

• 20' "severe duty" power cords, standard
• 4" discharge
• non clog, cast iron impellar
• built in thermal protection with automatic reset
• 230 volt, 1750 rpm motors - single phase, 230/460 volt,
  1750 rpm motors - 3 phase.
• capable of running dry without damage.

• 3450 rpm motors
• 2" discharge
• 33' power cord
• built in thermal protection with automatic reset
• single phase, 2 pole motors
• 115 volt only
• Use in our large pond skimmer

• Rugged motor - designed for long life, continuous duty operation; motor housing is corrosion-resistant stainless steel.
• Low maintenance - pump casing is made from abrasion-resistant, fiber- reinforced plastic for maximum life
• Vortex design prevents clogging
• Built-in overload and overheat motor protection
• 2" female threaded outlet
• 20' power cord
• Now available in 4 sizes, 2900, 3900, 4900 and 5900 GPH
• 2 year manufacturer's warranty!

• Compact design - high output in a small package
• Continuous duty, air-filled motors - designed for the demanding job of consistent operation in pond and waterfall applications
• Motors have thermal overload protection as well as overheat protection with auto reset
• Built from cast iron and stainless steel for maximum durability
• Double mechanical seal ensures long term operation
• Corrosion resistant aluminum impeller
• One year manufacturer's warranty
• Vortex design helps eliminate plugging
• 115 volt
• 30' power cord